When a tumble dryer takes three cycles to dry one load, the problem is usually a heating element, sensor or airflow fault — all repairable at home in most cases. Our Ajman dryer repair service covers vented, condenser and heat-pump dryers from all major brands, with diagnosis and a firm quote before parts are changed.
What the visit includes
- Heating element and thermostat replacement
- Drum belt, rollers and bearing repair
- Moisture sensor cleaning and replacement
- Blocked vent and lint-path deep cleaning
- Control board diagnosis
- Condenser and filter servicing for heat-pump dryers
Signs you need this service
- Dryer runs but produces no heat
- Loads take far longer than they used to
- Drum not turning while the motor hums
- Squeaking, thumping or scraping noises
- Dryer stops minutes after starting
- Clothes come out hot but still damp
How booking works
Send us a WhatsApp message with the appliance or system type, the symptoms and your area. We agree a visit window and the visit terms upfront. The technician diagnoses the fault at your property, explains what failed and quotes the full repair — work starts only when you say yes. After the repair we test everything together before payment.
Serving a business or managing several properties? Ask about our annual maintenance contracts so visits like this are already scheduled before anything breaks.
Dryer Repair Services FAQs
Why is my dryer not heating at all?
Most often a failed heating element, a blown thermal fuse or a faulty thermostat — a safety part that cuts power when the dryer overheats, usually because of a blocked vent. We test each part in sequence and replace only the one that failed.
How long does a dryer repair usually take?
Most common faults — elements, belts, fuses, sensors — are completed in a single visit of about an hour once diagnosed. Board-level repairs can take longer and we will explain the options and costs before proceeding.
Can a blocked dryer vent be dangerous?
Yes. Lint build-up restricts airflow, makes the dryer overheat and is a recognised fire risk. If your dryer is hot to the touch or the laundry room feels humid during cycles, book a vent and lint-path clean as a priority.
Do you service heat-pump dryers?
Yes — including condenser cleaning, refrigerant-side diagnosis and sensor faults. Heat-pump dryers are more complex than basic vented models, so send the model number ahead and we will assign the right technician.
How much does dryer repair cost?
Cost follows the fault: heating elements, thermal fuses, belts and sensors are single-visit repairs, while control board work takes longer. We diagnose the dryer at your home, quote the full repair before changing parts, and work only starts when you approve the price.
How much are tumble dryer repairs compared with replacing the dryer?
Most common tumble dryer faults — no heat, a snapped belt, a failed sensor — repair for noticeably less than a new machine, especially on mid-range and heat-pump models. When a repair approaches the value of the dryer, we will lay out both options with the quote so you can decide with the full picture.
What is a dryer repair kit?
A repair kit is a bundle of the wear parts that commonly fail together on a dryer — typically the belt, drum rollers or glides, and an idler pulley. Fitting the set together makes sense when several wear parts are at the end of their life at once; we will show you the worn parts and explain whether a single part or the set is the right fix for your machine.
How do you repair a dryer vent?
We disconnect and clear the vent run of lint build-up, check the hose or duct for crushing and leaks, reseat or replace damaged sections, and confirm strong airflow at the outside outlet before finishing. A clear vent is also a safety matter — restricted vents make dryers overheat.
How do you fix a dryer that is not heating?
We test the heating element, thermal fuse and thermostats in sequence — the fuse usually blows because the vent was blocked, so the vent is checked as part of the same repair. Only the failed part is replaced, and the dryer is run-tested on a heated cycle before we leave.
How do you fix a dryer that is not spinning?
A non-turning drum is most often a snapped belt, a worn idler pulley or a motor fault. We open the machine, confirm which one has failed, fit the replacement and test the drum under load. If the motor itself has failed on an older dryer, we quote it and tell you honestly whether the repair is worthwhile.
